Fluke Ti50FT View larger

Fluke Ti50FT-10/20 IR-Fusion FlexCam Thermal Imager

Fluke Ti50FT

New product

Sell New Fluke Ti50FT-10/20 IR-Fusion FlexCam Thermal Imager

More details


$10,500.00 per Unit

More info

Fluke Ti50FT-10/20 IR-Fusion FlexCam Thermal Imager

See exactly what you are viewing Fluke IR-Fusion™ technology (available on FT models) links a real world visual image with a thermal image. It merges the two images into one, with the possibility to blend between the two images or create picture-in-picture combinations. Alarm limits can be superimposed over the visible light image to exactly pinpoint the components exceeding a specified temperature limit. Both the visual images and thermal images are available for use in reports. This speeds up documentation by reducing the need to look for individual images taken with a separate digital camera. IR Fusion helps to better identify and report suspect components and enable the repair to be done right the first time.

Large, sharp thermal images Thanks to the largest display (five-inch) available on this type of thermal imager in combination with low-noise VOx sensors, the Fluke IR FlexCam units produce exceptionally high-quality images making even the smallest temperature differences visible. This is comparable with images normally only obtained on far more expensive instruments.

A sharp image in every situation The innovative 180° articulating lens makes it possible to view and capture images in areas with poor accessibility. The display remains clearly visible while viewing over high objects, under a machine or around immoveable obstructions. The SmartFocus wheel simplifies getting a stable and sharp image. No need to take your hand off the instrument to turn a focus ring.

Make anomalies visible Thanks to built-in functions like AutoCapture, the IR FlexCam Thermal Imagers help to troubleshoot difficult problems. The instrument is easily set up to automatically capture only those images where a temperature limit is exceeded. This way, difficult to find intermittent problems can be captured and analyzed quicker by concentrating only on the images containing the anomalies.

Analysis and reporting comes standard The SmartView™ software (supplied with the unit) includes a complete range of infrared image viewing, analysis, annotation and reporting tools. It even allows for customized reports to accommodate specific company work processes or requirements like multiple image reporting and comparisons.

Radiometric measurement - the "data behind the picture" Fully radiometric thermal imagers capture and store calibrated temperature data for the matrix of thousands of points that make up a thermal image. This makes it possible to perform detailed analysis and change key parameters like emissivity or temperature range either in the field on the camera or in the office using the PC software.


  • Predictive maintenance - Identify electrical and mechanical problems before they cause failure
  • Power/utilities - Real-time analysis of substations, transmission lines and equipment
  • Process monitoring - Real-time observation to ensure efficient and safe operation
  • Research and development - Quantify heat patterns to improve product designs
  • Electronic design - Close up circuit board analysis


Calibrated temperature range -20 to 350°C (-4 to 662°F) in 2 ranges
Range 1 -20 to 100°C (-4 to 212°F)
Range 2 -20 to 350°C (-4 to 662°F)
Accuracy ±2°C or 2 % (whichever is greater)
Measurement modes Centerpoint, center box (area min/max, average)
Emissivity correction 0.1 to 1.0 (0.01 increments)
Thermal Field of view (FOV) 20mm lens: 20° x 17° FOV
10.5 mm lens: 42° x 32°
Spatial resolution (IFOV) 1.30 mrad
Thermal sensitivity (NETD) ≤ 0.07°C (70 mK) at 30°C
Visible light digital zoom 2x

Ask about this products


Write a review

Fluke Ti50FT-10/20 IR-Fusion FlexCam Thermal Imager

Fluke Ti50FT-10/20 IR-Fusion FlexCam Thermal Imager

Sell New Fluke Ti50FT-10/20 IR-Fusion FlexCam Thermal Imager